How to maintain the service life of lithium polymer batteries is often encountered in daily life. An inadvertent operation may cause lithium polymer batteries to be scrapped and irreparably damaged. If they are used improperly, they will only be wasted. money.
1. Correct storage method
When it comes to lithium polymer batteries, if you want to extend the life of your battery pack, you need to store it properly. If your charger does not have a defined charging mode for storing the battery pack, you may decide to do this process manually.
Every battery pack comes with a voltage pack and this is how you judge the best storage specs for a LiPo battery.
At the proper storage voltage, your battery is typically at 40% capacity and the battery pack is at 3.85 volts.
When you leave the battery on max charge when not in use, it drains faster than you think, and letting it nearly drain isn't the best option either.
To maximize Li-Po battery life, ensure storage voltage specifications are adhered to.
2. Use a lithium polymer compatible charger, do not overcharge
There are a lot of battery chargers out there that claim to provide a charge rate over 10+C, which is ridiculous because you'll end up with a damaged LiPo battery in no time.
Typically, lithium polymer batteries become unbalanced when charged, which causes them to have different voltage values.
To get the most out of your LiPo battery, you need to purchase a LiPo compatible charger.
The highest voltage a fully charged LiPo battery can go to is 4.20 volts, and it's not even recommended to charge to that point as it will shorten life, so it's best to charge below that.
For lithium polymer batteries, the lower the voltage below the 4.20 volt mark, the longer the battery's shelf life.
3. Battery temperature check
Lithium polymer batteries are sensitive, so it's not recommended that you just throw them around and go about your day.
Lithium polymer batteries tend to explode when damaged, overheated, heat is a huge deal breaker, and they don't charge well in hot environments.
Storing your LiPo battery pack according to ideal storage specifications without keeping it in a cool place is a disaster.
Therefore, make sure your battery has cooled down to an appropriate temperature before using or charging it.
Most people fail to follow this rule, not because they don't want to, but because they don't even know the capacity of the battery pack. The best way to do this is to know the maximum run time of the LiPo battery pack so it doesn't exceed 80%.
Post time: Feb-16-2023
