The activation of lithium-ion batteries does not require a special method, and lithium-ion batteries will be activated naturally during normal use. If you insist on using the popular first three 12-hour long charge activation methods, it will actually not work. When the quality of the original charger's own protection and control circuit is good, the protection of the 18650 lithium battery is still quite guaranteed. Charge according to the standard time and procedure, even for the first three times.
18650 Lithium Battery Repair Method
1. The metal surface of lithium-ion batteries used for a long time will be oxidized to a certain extent, resulting in poor contact between the mobile phone battery and the mobile phone. Rust substances, so that the contact between the battery and the phone becomes better.
2. The low temperature can change the electrolyte inside the 18650 lithium battery and promote the chemical reaction of the battery that has just been frozen. The use of lithium-ion batteries is actually a charging and discharging process. During this time, the negative and positive charges in the battery collide with each other. The reason why the battery will become less and less durable is because at normal room temperature, the kinetic energy inside the electron is relatively large, so the battery is in an active state and the leakage is relatively frequent.
3. To deeply discharge the mobile phone is to achieve a deeper recharging by exhausting the internal power, which requires some unconventional methods. Find a way to connect the mobile phone to a 1.5V small light bulb, and the power inside the 18650 lithium battery will be transferred to the small light bulb until all lights are emitted.
4. Take out all your 18650 lithium batteries and treat them with temperature. The battery will greatly shorten the use time when the temperature is unstable, because the battery is dead and a considerable part of the lithium ion has memory. In order to use this method to release part of the memory electricity, when winter comes, put it outside for a while, and then bring it inside.
5. There is another method, remove the battery, put it for about a week, and consume the electricity slowly, first use the machine to completely consume the electricity. Then fully charge it again. It is estimated that your current charging time must be very short. After it is fully charged, disconnect it and charge it again, and repeat it several times. It is absolutely effective.
Post time: Apr-20-2023
